W-912A.In-Wall PA Amplifier
Specification:
| Type | In-Wall Mounting 6 Channel Mixer Power Amplifier |
| Output Power | 120W RMS |
| Power Bandwidth |
(D)20 to 20,000 Hz, 0.5% THD
(T)50 to 20,000 Hz, 0.5% THD
|
| Frequency Response |
(D) 30 to 20,000 Hz ±1 dB
(T) 30 to 15,000 Hz ±1 dB
(T) 30 to 20,000 Hz +1dB, -2 dB
|
| Total Harmonic Distortion | 0.02% at 1 kHz, Rated Output |
| Inputs |
Six Input Ports ; 100mV / 10kohms
Each port accepts any input module except T-01S.
(Use T-01S only in port #5 or #6)
One Bridging Input/Output ; 100mV / 3.3kohms
|
| Outputs |
(T) 8 ohms, 25 V & 70 V, Balanced
(D) 4 ohms, Unbalanced
|
| Output Regulation (1kHz) |
(D) Less Than 0.5 dB, No Load to Full Load
(T) Less Than 1.0 dB, No Load to Full Load
|
| S/N Ratio |
(Band Pass : 20 to 20,000 Hz
Controls OFF ; 90 dB
Equalizer IN ; 88 dB
Master Volume Max. ;77 dB
Compressor IN ; 84 dB
|
| Compression |
Attack Time ; No Greater Than 2msec.
Compression Range ; 30 dB
Release Time ; Variable 20msec. to 2 sec
Distortion ; Less Than 1 %
|
| Equalization |
9-band One-octave Graphic Equalizer
Center Frequencies ; ISO 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16kHz
Equalization Range ; ±12 dB
|
| Filters |
High-pass Filter ; 180 Hz, 12 dB / octave
Low-pass Filter ; 7kHz, 12 dB / octave
|
| Indicators |
1 LED Power Indicator
1 LED Peak Indicator
|
| Protection Circuitry |
Built-in with 2 AC Fuse (1 inside) and 1 Output Circuitry
Output Circuitry Protection when Heatsink Temperature Overheats
|
| Connectors |
Input #1 to #6 ; Card-edge Connector
Output ; Screw-terminal strip
Bridging Input/Output ; Screw-terminal Strip
Mute ; Screw-terminal strip
|
| Power Requirement | 120 V AC, 60 Hz |
| Power Consumption | 100 W |
| User's Space (Blank Panel) |
Size (WxHxD) ; 101.6 (4") x 60.3 (2.4") x 95.3 (3.8") mm
Effective Space for Customizing
Optional expanding kit WE-2 may be loaded.
|
| Weight | 17.3 kg (38.14 lbs) ; Without Input Modules and Back Box |
| Color | Silver |
| Accessories | Volume Control Cover x 3 pcs |
| Associated Equipment |
Plug-in Modules for Input ; M-01S, U-01S, B-01S, L-01S, I-01S
Plug-in Modules for Input with MUTE ; U-11S, U-12S, B-11S, L-11S, M-11S
Plug-in Modules for Input with Remote Volume Control Facility ; M-21S, U-21S
Plug-in Modules for Line Output ; T-01S
Plug-in Modules for Tone Signal ; S-01S, S-02S, S-03S
Volume Control Cover ; YA-910
Expanded Kit ; WE-2
|
