DS-K1T671TM-3XF. Hikvision Ultra Face Recognition Terminals. #ASIP Connect
DS-K1T671TM-3XF. Hikvision Ultra Face Recognition Terminals. #ASIP Connect
- Supports Vanadium Oxide uncooled sensor to measure target's temperature
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
- Recognition distance: 0.5 to 1.5 m
- Fast temperature measurement mode: Detects face and takes temperature without identity authentication
- Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
- Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
- Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
- Displays temperature measurement results on the authentication page
- Triggers voice prompt when detecting abnormal temperature
- Configurable door status (open/close) when detecting abnormal temperature
- Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
- Face recognition duration £¼ 0.2 s/User; face recognition accuracy rate ≥ 99%
- 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
- Suggested height for face recognition: between 1.4 m and 1.9 m
- Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
- Watchdog design and tamper function
- Audio prompt for authentication result
- NTP, manually time synchronization, and auto synchronization
- Connects to external access controller or Wiegand card reader via Wiegand protocol
- Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
- Imports and export data to the device from the client software
- * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
- * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
- Temperature Measurement
- Temperature Range30 °C to 45 °C (86 °F to 113 °F)
- SensorVanadium Oxide uncooled sensor
- Resolution120 × 160
- Frame Rate25 fps
- Accuracy± 0.5 °C, without black body calibration
- Measuring Distance0.5 to 1.5 m
- Screen
- Size7-inch
- TypeTouch screen
- Operation MethodTouch screen
- Camera
- Pixel2 MP
- LensDual-lens
- Network
- Wired NetworkSupport, 10/100/1000 Mbps self-adaptive
- Interface
- Network Interface1
- Lock Output1
- Exit Button1
- Door Contact Input1
- Authentication
- Card TypeMifare 1 card
- Function
- Face Anti-SpoofingSupport
- Audio PromptSupport
- Others
- Working Temperature0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
- Working Humidity10 to 90% (No condensing)
- Application EnvironmentIndoor
